Fades

Temple Fade Haircut: The Subtle Temp Fade That Cleans Up the Frame

The temple fade targets only the temples and front hairline — leaving your top and back length completely intact — for a clean, polished look with minimal commitment and fast upkeep.

A temple fade — widely known as a temp fade or Brooklyn fade — is the most restrained entry in the fade family. Rather than fading the entire perimeter of the head, it only blends down the temple area and the front sideburn on each side. Everything behind that — the back of the head, the nape, the lower sides, the top — stays at whatever length it was. The effect is a clean, defined frame around the face without any dramatic reduction in overall hair length. It is one of the most popular techniques for textured, Afro, and curly hair precisely because it adds refinement without taking away volume or natural shape.

At a glance

Best for
All face shapes; especially round, oval; all hair types
Hair length needed
Any — works on short and long hair alike
Maintenance
Low to medium — 2–4 weeks
Barber visit
Every 2–4 weeks
Styling time
Under 5 min — no different to the existing top style
Difficulty to grow out
Very easy — only a small area to grow back

Exactly what the temple fade does

Imagine your natural hairline at the temple — the point where the forehead hair ends and the sideburn begins. A temple fade takes that section, usually 2–4 cm wide, and graduates it from very short (bare skin or a #0.5 shadow) at the lowest point up to the existing hairline length. The blending zone extends a short distance above the natural temple line, giving the hairline a soft, graduated edge rather than an abrupt one.

The key is that it stops there. A barber doing a temple fade does not continue the fade around the back of the head. The shape of the hair behind the ears and at the nape remains completely natural. This is why the temp fade is sometimes called a "hairline fade" or "front fade" in some barbershops — it is all about the front frame.

Barber tip: Ask for a "temple fade with a natural finish" if you don't want a hard line-up at the front hairline. This tells the barber to blend the fade into your existing hairline rather than shaving a sharp defined edge — giving a cleaner but more relaxed look that suits a wider range of settings.

Temple fade vs. full fade: key differences

Understanding the difference matters because they require completely different maintenance schedules and produce very different visual results. See the full fade haircut guide to compare all fade types side by side.

Temple fade vs. full fade compared
FeatureTemple FadeFull Fade (low/mid/high)
Area fadedTemples and front sideburn onlyFull perimeter — sides and back
Length keptAll of top, back, lower sidesOnly the top section
Visual impactSubtle — refines the frameBold — transforms the silhouette
MaintenanceEvery 2–4 weeksEvery 1–3 weeks
Best when you wantClean look, minimal changeHigh contrast, modern silhouette

Why the temple fade is the default for Afro and textured hair

For people with type 3 curly, type 4 coily, or Afro-textured hair, a full fade often means removing a significant amount of hair volume that took weeks or months to grow. The temple fade is the answer to wanting clean edges without sacrificing that volume. It frames the face at the most visible point — the temples — without touching the crown, the sides, or the nape.

On an Afro in particular, the temp fade creates a clean border between the fade and the natural hair shape, making the overall silhouette look intentional and defined. The fade emphasises the roundness of a full Afro rather than working against it. The same principle applies to two-strand twists, locs, or any natural style where length and volume are priorities. See our guide to hair types for more on styling and caring for natural texture.

Styles that work with a temple fade

Because the temple fade changes so little of the overall length, it is incredibly versatile. It can be added to almost any existing hairstyle as a refinement:

  • Afro — the go-to combination. The faded temples give the Afro a finished front edge without reducing its size.
  • Textured crop or French crop — a short top with a temp fade gives an urbane, low-maintenance look. Read the French crop guide for product and length advice.
  • Comb-over or side part — the temp fade under a side-parted style makes the front of the part look cleaner and more deliberate. See the comb-over guide.
  • Longer natural styles — medium-length locs, coils, or curls all benefit from a clean temple line without needing a dramatic cut.
  • Edgar cut — the blunt-edged top of an Edgar with a temple fade below the front hairline is a popular street-style combination. See the Edgar cut guide.

How to ask your barber for a temple fade

  1. Say "temple fade" or "temp fade" and point to the temple area on each side of your head to confirm scope — barbers sometimes interpret it differently.
  2. Specify the depth: "bare skin at the lowest point" for maximum contrast, or "shadow fade to a #0.5" for something softer.
  3. Tell them whether you want a hard line-up along the front hairline or a natural blended edge.
  4. Confirm that you do NOT want the back or lower sides touched — this ensures the barber doesn't extend the fade further than intended.
  5. If you need the whole head tidied up as well as the temples, say so separately and be clear about how much length to take off the top.

For the full vocabulary of how to communicate with your barber, our guide to asking your barber covers everything you need. Unsure what guard sizes mean? Check the clipper guard sizes chart.

Barber tip: The temple fade is one of the cleanest and fastest add-ons to any appointment. If you want to test whether fades suit you before committing to a full perimeter fade, ask for a temp fade first. It gives you a taste of the fade look with almost no risk — if you don't like it, the area grows back in 3–4 weeks and your main length is untouched.

Frequently asked questions

What is a temple fade?
A temple fade — also called a temp fade or Brooklyn fade — is a style where only the temples and the front hairline area are faded or blended short. The rest of the head: the top, the crown, the back, and the lower sides are left at their natural length. It is a very localised fade that cleans up the frame of the face without changing the overall length of the hair.
How is a temple fade different from a full fade?
A full fade (low, mid, high, or skin) graduates hair from short at the baseline all the way around the head — sides, back, and everything above the ear. A temple fade only fades the temple and sideburn area at the front of the head. The back and lower sides retain their length. It is far subtler, faster to do, and keeps most of the hair intact.
Is a temple fade good for Afro and curly hair?
Yes — the temple fade is extremely popular with Afro, coily, and curly hair. It frames the face cleanly without disrupting the shape of the natural hair. The temples are the most visible area from the front, so a clean fade there makes the overall look appear polished without requiring a full cut. It works equally well on TWA (teeny weeny afros), mid-length naturals, and longer curly styles.
How long does a temple fade take at the barber?
A temple fade alone typically takes 10–20 minutes because the work is limited to a small area. If it is combined with a full haircut on top, expect the full appointment to run 30–45 minutes. Many barbers offer it as an add-on to a standard cut or as a standalone refresh between main appointments.
How often does a temple fade need touching up?
Every 2–4 weeks. Because the temple fade is so localised, regrowth at the back and sides does not affect it. The temples and sideburn area alone become fuzzy, and for most people that takes 3–4 weeks to become noticeably untidy. People with faster hair growth or who want a crisper look may prefer a 2-week touch-up.
Can I do a temple fade at home?
It is possible with a good trimmer and a steady hand, but tricky to get symmetrical on your own. The temples sit at the front of the head and are easy to see in a mirror, which helps. Use a T-blade trimmer with no guard for the shortest fade zone, then blend up with a #0.5 and #1 guard. Work in small passes and compare both sides frequently.

Refresh your temple fade at home

A precision trimmer makes all the difference when touching up temples between barber visits.

Best trimmers guide